Qingdao XMD Autos Ball Bearing Co., Ltd.
Qingdao XMD Autos Ball Bearing Co., Ltd.
TOKYO KEIKI Piston Pump P*V Series   TOKYO KEIKI Single Vane Pump   TOKYO KEIKI Double Vane Pump  
English
English
  • Home
  • Stock Categories
    • TOKYO KEIKI Piston Pump P*V Series
    • TOKYO KEIKI Single Vane Pump
    • TOKYO KEIKI Double Vane Pump
    • TOKYO KEIKI Triple Vane Pump
    • TOKYO KEIKI Piston Pump P Series
    • TOKYO KEIKI Vane Pump
    • FAG Bearing
    • IKO Bearing
    • KOYO Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • AURORA Bearing
    • REXROTH Throttle check valves
    • REXROTH Directional spool valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Check valves
    • REXROTH Throttle valves
    • REXROTH Twin throttle check valve
    • REXROTH Valves
    • REXROTH Pressure relief valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Pressure reducing valve
    • Jm716610 Bearing
    • 212049 Bearing
    • Jlm704610 Bearing
    • Hm212049 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Kaydon Slewing Bearing
    • THK Linear Guide
    • THK Miniature Linear Guide
    • THK Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • THK Linear Bearings And Rails
    • THK Linear Motion
    • Double-row Cylindrical Roller Bearings
    • Four-row Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
  • Technical Articles
  • TOKYO KEIKI Piston Pump P*V Series
  • TOKYO KEIKI Single Vane Pump
  • TOKYO KEIKI Double Vane Pump
✖

Home

Stock Categories

Technical Articles

TOKYO KEIKI Piston Pump P*V Series

TOKYO KEIKI Single Vane Pump

TOKYO KEIKI Double Vane Pump

Home>Products>IKO Bearing>1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings

  • 1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings
  • 1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings
  • 1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings
  • 1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings
  • 1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings
  • 1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings

IKO LRTZ354230 MODELS

Need a CAD or 3D Model?

What is LRTZ354230 bearing interchange？
Contact NowWhatsAppBe Our Agent

1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings

category

IKO Bearing

IKO LRTZ354230 Bearing SPECIFICATIONS

  • Enjoy High 7.85 Static Load Rating (kN): Margins on 1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter Competitive IKO Bearing Pricing.Great Wholesale Qingdao XMD Autos Ball Bearing Co., Ltd. Products at Low Costs.

  • IKO

  • LRTZ354230

  • 745
  • 748-S
  • Imperial
  • Stamped Steel
  • 147000 lbf
  • 38200 lbf
  • 3 in
  • 1.8375 in
Download IKO LRTZ354230 Spec Sheet
Qingdao XMD Autos Ball Bearing Co., Ltd.

Qingdao XMD Autos Ball Bearing Co., Ltd.China

  • Qingdao XMD Autos Ball Bearing Co., Ltd.2020-07-10 09:46:19
    Welcome to my shop! Glad to serve you! Please send your question!
Price Inspection Certificate Product Specifications Company Profile

1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings Dimensions

  • 745
  • 748-S
  • Imperial
  • Stamped Steel
  • 147000 lbf
  • 38200 lbf
  • 3 in
  • 1.8375 in
  • 0.14 in
  • 3.43 in
  • 3.66 in
  • 0.08 in
  • 0.05 in
  • -0.47 in
  • 21900 lbf
  • 84700 lbf
  • 93800 lbf
  • 12200 lbf
  • 1.8
  • 159.6
  • 26.3
  • 0.0898
1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings pdf

IKO LRTZ354230 IKO Bearing Product Identifiers

Frequently bought 1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings together

No.BranddCDBBcFwEwC0
FWF-354230NSK3543 kN42 - 30 mm35 mm42 mm75,5 kN
KT 354230IKO3540,6 kN42 - 30 mm35 mm42 mm70,3 kN
LRTZ354230IKO1.378 Inch | 35 Millimeter - 1.654 Inch | 42 Millimeter1.201 Inch | 30.5 Millimeter - - - -
KT354230IKO1.378 Inch | 35 Millimeter - 1.654 Inch | 42 Millimeter1.181 Inch | 30 Millimeter - - - -
LRT354230IKO1.378 Inch | 35 Millimeter - 1.654 Inch | 42 Millimeter1.201 Inch | 30.5 Millimeter - - - -

 

IKO NAG4915 Roller BearingsSeries:745; Cone Part Number:748-S; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:147000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38200 lbf; d:3 in; B - Cone Width:1.8375 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:3.43 in; db - Cone Backface Backing Diameter:3.66 in; Ab - Cage-Cone Frontface Clearance:0.08 in; Aa - Cage-Cone Backface Clearance:0.05 in; a - Effective Center Location4:-0.47 in; C90 - Dynamic Radial Rating (90 million revolutions)5:21900 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:84700 lbf; C0 - Static Radial Rating:93800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12200 lbf; K - Factor8:1.8; G1 - Heat Generation Factor (Roller-Raceway):159.6; G2 - Heat Generation Factor (Rib-Roller End):26.3; Cg - Geometry Factor:0.0898;
0.375 Inch | 9.525 Millimeter x 0.563 Inch | 14.3 Millimeter x 0.5 Inch | 12.7 Millimeter IKO YB68/MF3 Needle Non Thrust Roller BearingsSeries:745; Cone Part Number:748-S; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:147000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38200 lbf; d:3 in; B - Cone Width:1.8375 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:3.43 in; db - Cone Backface Backing Diameter:3.66 in; Ab - Cage-Cone Frontface Clearance:0.08 in; Aa - Cage-Cone Backface Clearance:0.05 in; a - Effective Center Location4:-0.47 in; C90 - Dynamic Radial Rating (90 million revolutions)5:21900 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:84700 lbf; C0 - Static Radial Rating:93800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12200 lbf; K - Factor8:1.8; G1 - Heat Generation Factor (Roller-Raceway):159.6; G2 - Heat Generation Factor (Rib-Roller End):26.3; Cg - Geometry Factor:0.0898;
IKO CFE10-1UURM Cam Follower and Track Roller - Stud TypeSeries:745; Cone Part Number:748-S; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:147000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38200 lbf; d:3 in; B - Cone Width:1.8375 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:3.43 in; db - Cone Backface Backing Diameter:3.66 in; Ab - Cage-Cone Frontface Clearance:0.08 in; Aa - Cage-Cone Backface Clearance:0.05 in; a - Effective Center Location4:-0.47 in; C90 - Dynamic Radial Rating (90 million revolutions)5:21900 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:84700 lbf; C0 - Static Radial Rating:93800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12200 lbf; K - Factor8:1.8; G1 - Heat Generation Factor (Roller-Raceway):159.6; G2 - Heat Generation Factor (Rib-Roller End):26.3; Cg - Geometry Factor:0.0898;
3 Inch | 76.2 Millimeter x 3.75 Inch | 95.25 Millimeter x 1.75 Inch | 44.45 Millimeter IKO BR486028 Needle Non Thrust Roller BearingsSeries:745; Cone Part Number:748-S; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:147000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38200 lbf; d:3 in; B - Cone Width:1.8375 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:3.43 in; db - Cone Backface Backing Diameter:3.66 in; Ab - Cage-Cone Frontface Clearance:0.08 in; Aa - Cage-Cone Backface Clearance:0.05 in; a - Effective Center Location4:-0.47 in; C90 - Dynamic Radial Rating (90 million revolutions)5:21900 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:84700 lbf; C0 - Static Radial Rating:93800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12200 lbf; K - Factor8:1.8; G1 - Heat Generation Factor (Roller-Raceway):159.6; G2 - Heat Generation Factor (Rib-Roller End):26.3; Cg - Geometry Factor:0.0898;
1.125 Inch | 28.575 Millimeter x 1.375 Inch | 34.925 Millimeter x 1.265 Inch | 32.131 Millimeter IKO IRB1820 Needle Non Thrust Roller BearingsSeries:745; Cone Part Number:748-S; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:147000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38200 lbf; d:3 in; B - Cone Width:1.8375 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:3.43 in; db - Cone Backface Backing Diameter:3.66 in; Ab - Cage-Cone Frontface Clearance:0.08 in; Aa - Cage-Cone Backface Clearance:0.05 in; a - Effective Center Location4:-0.47 in; C90 - Dynamic Radial Rating (90 million revolutions)5:21900 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:84700 lbf; C0 - Static Radial Rating:93800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12200 lbf; K - Factor8:1.8; G1 - Heat Generation Factor (Roller-Raceway):159.6; G2 - Heat Generation Factor (Rib-Roller End):26.3; Cg - Geometry Factor:0.0898;
IKO NBX5035 Thrust Roller BearingSeries:745; Cone Part Number:748-S; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:147000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38200 lbf; d:3 in; B - Cone Width:1.8375 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:3.43 in; db - Cone Backface Backing Diameter:3.66 in; Ab - Cage-Cone Frontface Clearance:0.08 in; Aa - Cage-Cone Backface Clearance:0.05 in; a - Effective Center Location4:-0.47 in; C90 - Dynamic Radial Rating (90 million revolutions)5:21900 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:84700 lbf; C0 - Static Radial Rating:93800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12200 lbf; K - Factor8:1.8; G1 - Heat Generation Factor (Roller-Raceway):159.6; G2 - Heat Generation Factor (Rib-Roller End):26.3; Cg - Geometry Factor:0.0898;
0.591 Inch | 15 Millimeter x 0.787 Inch | 20 Millimeter x 1.004 Inch | 25.5 Millimeter IKO IRT1525-2 Needle Non Thrust Roller BearingsSeries:745; Cone Part Number:748-S; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:147000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38200 lbf; d:3 in; B - Cone Width:1.8375 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:3.43 in; db - Cone Backface Backing Diameter:3.66 in; Ab - Cage-Cone Frontface Clearance:0.08 in; Aa - Cage-Cone Backface Clearance:0.05 in; a - Effective Center Location4:-0.47 in; C90 - Dynamic Radial Rating (90 million revolutions)5:21900 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:84700 lbf; C0 - Static Radial Rating:93800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12200 lbf; K - Factor8:1.8; G1 - Heat Generation Factor (Roller-Raceway):159.6; G2 - Heat Generation Factor (Rib-Roller End):26.3; Cg - Geometry Factor:0.0898;
1 Inch | 25.4 Millimeter x 1.25 Inch | 31.75 Millimeter x 0.875 Inch | 22.225 Millimeter IKO BAM1614 Needle Non Thrust Roller BearingsSeries:745; Cone Part Number:748-S; Design Units:Imperial; Cage Type:Stamped Steel; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:147000 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:38200 lbf; d:3 in; B - Cone Width:1.8375 in; R - Cone Backface To Clear Radius3:0.14 in; da - Cone Frontface Backing Diameter:3.43 in; db - Cone Backface Backing Diameter:3.66 in; Ab - Cage-Cone Frontface Clearance:0.08 in; Aa - Cage-Cone Backface Clearance:0.05 in; a - Effective Center Location4:-0.47 in; C90 - Dynamic Radial Rating (90 million revolutions)5:21900 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:84700 lbf; C0 - Static Radial Rating:93800 lbf; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:12200 lbf; K - Factor8:1.8; G1 - Heat Generation Factor (Roller-Raceway):159.6; G2 - Heat Generation Factor (Rib-Roller End):26.3; Cg - Geometry Factor:0.0898;

 

 

1.378 Inch | 35 Millimeter x 1.654 Inch | 42 Millimeter x 1.201 Inch | 30.5 Millimeter IKO LRTZ354230 Needle Non Thrust Roller Bearings Video

 

IKO LRTZ354230 INTERCHANGE

IKO Bearing Part series LRTZ354230 is a potential replacement for these common bearing part numbers:

  • LRTZ354230

  • LRTZ354230

  • LRTZ354230

  • LRTZ354230

  • LRTZ354230

  • LRTZ354230

  • LRTZ354230

  • LRTZ354230

Contact Us

Qingdao XMD Autos Ball Bearing Co., Ltd.
AddressNO.16 KeYuanWei Third RD,Qingdao,Shandong,China
Phone(Working Time)86-02-7515247
Fax
  • Qingdao XMD Autos Ball Bearing Co., Ltd.
    • Quick question Quick question I'm very interested in your products; could you send me some detail reference information? Please send me detail product specification, thank you! May I be an agency of your products,and what's yourterms? We intend to purchase this product, would you please send me the quotation and minimum order quantity?
     This feature is Quick question function, select the corresponding question types, automatically enter the corresponding problem, remove your trouble of typing
Send Now

IKO LRTZ354230 Technical Articles

Can you drive with bad engine bearings?
5 Common Engine Bearing Failure Symptoms – CAR FROMDec 24, 2018 — How long can you drive a car with a bad wheel bearing? Loss of oil pressure is also one of engine bearing failure symptoms you need to  How to Know When a Rod or Main...
How are bearings written?
Bearings - Interactive Maths Series software (interactiveIt is used to find a direction or bearing . The true bearing to a point is the angle measured in degrees in a clockwise To state the direction of a point, write: Bearings - Mathematics GCSE...
How much grease should you add to a motor bearing?
Electric Motor Bearing Greasing Basics - Reliabilityweb: ABearings should be lubricated at an average frequency as found in Table 2. We are limiting this paper to a standard deep-groove ball bearing without shields or When too much grease is added, the...

IKO Bearing CATEGORIES

  • TOKYO KEIKI Piston Pump P*V Series
  • TOKYO KEIKI Single Vane Pump
  • TOKYO KEIKI Double Vane Pump
  • TOKYO KEIKI Triple Vane Pump
  • TOKYO KEIKI Piston Pump P Series
  • TOKYO KEIKI Vane Pump
  • FAG Bearing
  • IKO Bearing
  • KOYO Bearing
  • NSK Bearing
  • NTN Bearing
  • SKF Bearing
  • Timken Bearing
  • AMI Bearing
  • AURORA Bearing
  • REXROTH Throttle check valves
  • REXROTH Directional spool valves
  • REXROTH Throttle check valve
  • REXROTH Directional poppet valves
  • REXROTH Check valves
  • REXROTH Throttle valves
  • REXROTH Twin throttle check valve
  • REXROTH Valves
  • REXROTH Pressure relief valve
  • REXROTH HY-CHECK VALVE
  • REXROTH Pressure reducing valve
  • Jm716610 Bearing
  • 212049 Bearing
  • Jlm704610 Bearing
  • Hm212049 Bearing
  • Large Slewing Bearings
  • Slewing Ring Bearings
  • Bearing Slewing Ring
  • Kaydon Slewing Bearing
  • THK Linear Guide
  • THK Miniature Linear Guide
  • THK Linear Guide Rails
  • High Temperature Linear Guide
  • Curved Linear Guide
  • THK Linear Bearings And Rails
  • THK Linear Motion
  • Double-row Cylindrical Roller Bearings
  • Four-row Cylindrical Roller Bearings
  • Bearings For Metric And Inch Shaft Sizes
  • Cylindrical Roller Bearings
More

Customers Who Viewed IKO LRTZ354230 Bearing Also Viewed

  • IKO NBX5035 Thrust Roller Bearing
  • IKO CR20BUU Cam Follower and Track Roller - Stud Type
  • IKO CR32BUU Cam Follower and Track Roller - Stud Type
  • IKO CR26VUUR Cam Follower and Track Roller - Stud Type
  • 1.969 Inch | 50 Millimeter x 2.441 Inch | 62 Millimeter x 0.984 Inch | 25 Millimeter IKO TAF506225 Needle Non Thrust Roller Bearings

Top Products

TIMKEN RFC1 1/8 Flange Block Bearings KOYO NTHA-4270 Thrust Roller Bearing FAG NU2326-E-M1A-C3 Cylindrical Roller Bearings
TOKYO KEIKI SQP31-17-6-86CD-18 Double Vane Pump Timken m88043 Bearing
 
  • About Us|
  • Contact Us|
  • Site Map
  • Sitemaps

Qingdao XMD Autos Ball Bearing Co., Ltd.. Copyright © 2017 - 2023 All Rights Reserved.

  • Home
  • Stock Categories
    • TOKYO KEIKI Piston Pump P*V Series
    • TOKYO KEIKI Single Vane Pump
    • TOKYO KEIKI Double Vane Pump
    • TOKYO KEIKI Triple Vane Pump
    • TOKYO KEIKI Piston Pump P Series
    • TOKYO KEIKI Vane Pump
    • FAG Bearing
    • IKO Bearing
    • KOYO Bearing
    • NSK Bearing
    • NTN Bearing
    • SKF Bearing
    • Timken Bearing
    • AMI Bearing
    • AURORA Bearing
    • REXROTH Throttle check valves
    • REXROTH Directional spool valves
    • REXROTH Throttle check valve
    • REXROTH Directional poppet valves
    • REXROTH Check valves
    • REXROTH Throttle valves
    • REXROTH Twin throttle check valve
    • REXROTH Valves
    • REXROTH Pressure relief valve
    • REXROTH HY-CHECK VALVE
    • REXROTH Pressure reducing valve
    • Jm716610 Bearing
    • 212049 Bearing
    • Jlm704610 Bearing
    • Hm212049 Bearing
    • Large Slewing Bearings
    • Slewing Ring Bearings
    • Bearing Slewing Ring
    • Kaydon Slewing Bearing
    • THK Linear Guide
    • THK Miniature Linear Guide
    • THK Linear Guide Rails
    • High Temperature Linear Guide
    • Curved Linear Guide
    • THK Linear Bearings And Rails
    • THK Linear Motion
    • Double-row Cylindrical Roller Bearings
    • Four-row Cylindrical Roller Bearings
    • Bearings For Metric And Inch Shaft Sizes
    • Cylindrical Roller Bearings
  • Technical Articles
  • TOKYO KEIKI Piston Pump P*V Series
  • TOKYO KEIKI Single Vane Pump
  • TOKYO KEIKI Double Vane Pump
✖

Home

Stock Categories

Technical Articles

TOKYO KEIKI Piston Pump P*V Series

TOKYO KEIKI Single Vane Pump

TOKYO KEIKI Double Vane Pump

Contact Us