TOKYO KEIKI SQP42-57-15-86CD-18 Double Vane Pump

Y1 - ISO Factor5:1.44; D:11.3750 in; r - Cup Frontface To Clear Radius2:0.06 in; Y - ISO Factor1:1.28; Cg - Geometry Factor7:0.129; C - Double Cup Width:4.5000 in; Design Units:Imperial; K - Factor3:1.25; Y2 - ISO Factor6:2.15; Series:94000;

Days to Ship:7 Days; Flange Shape:Round Type; Number of Bearings:Double; Housing Material:[Aluminum Alloy] 201; Shape:Flanged Pilot Type; Bearing Retained:No; Bearing Material:[Steel] Steel; Type:Bearings with Housin; Flange O.D. H(φ):50; Type:Bearings with Housin;

Shape:Flange Type; Bearing Part Number:6201; Volume Discount:Available; Bearing Retained:No; Days to Ship:7 Days; Bearing I.D. d(mm):12; Flange O.D. H(φ):56; Width T(mm):12; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea;

Unit, Type:Bearing unit; Basic Load Rating, Static Rating(N):17800; B:175; Unit Body Material:Cast Iron; Temperature Properties:Standard; Bearing Inner Dia. Shape:Cylindrical Bore Set; Lubrication method:Oil-Free Type; d:40; Seal:With double rubber s; Unit, Type:Bearing unit;

Db - Cup Backface Backing Diameter:54.10 mm; G1 - Heat Generation Factor (Roller-Raceway):14.6; R - Cone Backface To Clear Radius1:3.560 mm; Design Units:Imperial; e - ISO Factor8:0.35; C1 - Dynamic Radial Rating (1 million revolutions)5:13500 lbf; Cage Type:Stamped Steel; C90 - Dynamic Radial Ratin

Bearing Part Number:626; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Housing Material:1045 Carbon Steel; Holder Surface Treatment:Electroless Nickel P; Shape:Flange Type; Number of Bearings:Double; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Bearing Retained:Yes (with ret

D:69.012 mm; Bearing Weight:0.4 Kg; Cage Type:Stamped Steel; Db - Cup Backface Backing Diameter:55.88 mm; e - ISO Factor8:0.38; Design Units:Imperial; K - Factor7:1.53; Cg - Geometry Factor:0.0668; a - Effective Center Location3:-10.7 mm; B:25.687 mm;

Recommended tightening torque for set screw:16.8 Nm; S:25.4 mm; r:1.1; B:65.1 mm; d:61.91 mm; C:27 mm; G:3/8-24UNF; C1:8.2 mm; Weight:1.45 kg; D:110 mm;

Combination symbol:No; Types:No; Internal Symbol:No; Inner/Outer Ring Material:Stainless Steel; Low Torque Specification:No; Precision:Grade 0; Type:Ball; Retainer Type:No; Torque Symbol:No; O.D.(Ø):27;

D:190 mm; Y1:2.06; Nref:3,000 rpm; Fatigue limit load, Cu:58 kN; Static load, C0:652 kN; Dynamic load, C:668 kN; Number of lubrication holes:3; Characteristic rolling element frequency, BSF:4.68 Hz; da min:104 mm; Mass:8.28 kg;

Outer Ring Shape:Flat; Specifications, Environment:Standard; Size Standards:Metric System; D:90; Allowable Rotational Velocity(Grease Lubrication)(rpm):7800; Days to Ship:9 Days or more; Outer Ring Shape:Flat; Load Type:Radial; Type:Ball; Basic Dynamic Load Rating Cr(N):40500;

Weight:1.9 lb; Bearing Type:Thrust Tapered Rolle; B:1.0320 in; d - Bore Diameter:1.9475 in; Oil Holes in Retainer:No; R - Fillet Radius Shaft (Max):0.03 in; D - Bearing O.D.:3.6770 in; Steering Pivot Rating:19400 lbf;

Weight:3.95 kg; m:14 mm; S:34.1 mm; T min.:-20 °C; T max.:100 °C; SW:6 mm; C1:11 mm; C:35 mm; C0:63.8 kN; D:150 mm;

L:86 mm; d1:27.2 mm; C0:4.78 kN; G:M6x1; A2:37.1 mm; T min.:-40 °C; d:17.46 mm; C:9.55 kN; T max.:100 °C; J:64 mm;

Number of Bearings:Single; Bearing I.D. d(mm):30; Height Indication:Height Selection; Type:Bearings with Housin; Number of Bearings:Single; Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing Material:[Steel] Steel; Days to Ship:8 Days; Bearing Part Number:6006;